3dprinting

Man Creates a Working 35mm Movie Camera with 3D Printing

There is no denying that shooting on film is expensive. It is among the many reasons major studios have all shifted to using digital cameras for their movie-making. But even with the shift in technology and cost, there is just something appealing about the way these old analog cameras work. This is why engineer and designer Yuta Ikeya decided to make his own analog movie camera with 3D printing.

How I Attached a Camera Remote to a Handheld Light Pole

I occasionally like to do some light painting with strobes. To make that easier, I ripped off the legs of an old light stand so that it is just a handheld pole with a light. I also wanted to be able to control my camera with a remote when holding the light so that I can operate my camera on a tripod and do everything without an assistant.

A DIY Remote Mechanical Cable Release for a Large Format Camera

I do mainly large format photography, and I often take my own self-portrait by using my pneumatic cable release that has a long cable and air bulb release. However, I have long been thinking about how to make a more modern kind of remote cable release. In this article, I will show how I created a DIY remote cable release.

The Tilt-O-Matic is a 3D-Printed Tilt-Shift Adapter

I’ve been making tilt-shift lenses for a while now, and they’re a bunch of fun to make and shoot with. I don’t think I need to sell you on the creative possibilities of this type of photography and videography.

This Tilt-Shift Photo of Andromeda Was Shot Using a DIY Adapter

The Royal Observatory Greenwich’s Insight Investment 2020 Astrophotographer of the Year, Nicolas Lefaudeux, has revealed his technique and the simple DIY adapter that made his award-winning image of the Andromeda galaxy possible.

How I Made a DIY Gobo Holder for Studio Strobes

I wanted a device that can throw light patterns onto a wall or a model. There are some commercially available but they are quite expensive and I this was only for occasional use. I thought that this is something that can be 3D printed.

SCURA is a Curved Panoramic Pinhole Camera You Can Make at Home

Dora Goodman—maker of gorgeous hand-crafted custom cameras like these—is back with another 3D-printed, open-source camera that you can make at home. It's called the SCURA, and it's a curved pinhole camera that shoots 60x25mm panoramic images on regular 35mm film.