3dprinted

A couple of years ago I have been occasionally shooting 35mm films with point-and-shoot still cameras while also having the desire to shoot motion picture films.

A 3D-printable adapter allows fans of the Game Boy Camera to use small CS-mount interchangeable lenses with it, which also opens the door to adapting much larger optics to the camera first made available in 1998.

Apple's foray into digital cameras was short-lived but one photographer is still using his, only with a Nikon F-Mount placed on the 1995 camera.

Photographer Nicholas Sherlock 3D printed a $25 super wide-angle macro lens using glass from a CCTV camera and a 4x microscope.

Photographer Felix Steele has created a design for a 3D-printed 164mm f/2.5 lens that has no fasteners or screws, uses affordable glass elements, and can be built at home for less than $15.

A photographer has used his 3D printer to create an impressive 900mm reflector telescope that is so simple to put together that "it’s like assembling furniture from IKEA."

Electronics engineer Guarav Singh has 3D-printed a camera chassis that's designed to work with interchangeable lenses and sensors.

I occasionally like to do some light painting with strobes. To make that easier, I ripped off the legs of an old light stand so that it is just a handheld pole with a light. I also wanted to be able to control my camera with a remote when holding the light so that I can operate my camera on a tripod and do everything without an assistant.

Founder of the YouTube Channel and brand Unnecessary Inventions, Matty Benedetto decided to try and create something that is a bit in contrast to his branding: a way to simultaneously charge and use the Apple Magic Mouse.

I do mainly large format photography, and I often take my own self-portrait by using my pneumatic cable release that has a long cable and air bulb release. However, I have long been thinking about how to make a more modern kind of remote cable release. In this article, I will show how I created a DIY remote cable release.

Do you want to add a new dimension to your photos? Then lithophanes might be the thing for you. This is how you can bring an 18th-century art technique back to life with a 3D printer.

I recently began shooting with the new LomoGraflok 4×5 instant back from Lomography on my Chamonix 4×5 camera and found that I needed to use a spacer every time we compose a shot.

Browsing through an antique shop, I stumbled upon a Kodak slide projector with a very peculiar attachment: a large lens. This particular lens caught my eye as it was an absolute behemoth. It was heavy and had “ISCO GERMANY” engraved into it.

Ever feel like having an actual camera controller for the latest Pokémon Snap game on the

Photography enthusiast and camera tinkerer Nicholas Sherlock has created a new 3D-printed variable length extension tube for macro photography using wide and ultra-wide lenses.

LitiHolo, a company that bills itself as a global leader in hologram technology and production, has today unveiled its Desktop 3D Hologram Printer. This device, a first of its kind, allows anyone to print true three-dimensional holograms in a home or office setting.

Photographer Markus Hofstätter had been designing parts for his cameras and 3D printing them at home when the idea to try something new struck him: 3D printing photographs. After a lot of trial and error, he successfully found a way to translate wet plate photos into 3D printed pieces.

In 2016 and again in 2018, PetaPixel featured the work of Dora Goodman, a woman who was adding hand-crafted elements to analog cameras. Fast forward to 2021, and Goodman has gone steps further and finally created cameras of her own design.

In addition to the typical time intervalometer, Snaperture is a new camera trigger that combines all the popular ways of firing a camera shutter into one product using sensors that can react to light, sound, movement, and even distance.

Redditor Whomstevest has designed and 3d-printed a fully-functional Canon EF to RF tilt adapter and provided the design so that you can build your own at home. The adapter allows any Canon EF lens to adapt to an RF body and features infinity focus, 7 degrees of tilt, and 180 degrees of rotation.

I wanted a device that can throw light patterns onto a wall or a model. There are some commercially available but they are quite expensive and I this was only for occasional use. I thought that this is something that can be 3D printed.

Documentary filmmaker Tim Irwin has been making his own 3D-printed camera accessories for a while, but when COVID-19 cleared his work schedule, he finally has time to embark on a project he's had his eye on for some time: creating quick-draw battery holders for everyone else.

Dora Goodman—maker of gorgeous hand-crafted custom cameras like these—is back with another 3D-printed, open-source camera that you can make at home. It's called the SCURA, and it's a curved pinhole camera that shoots 60x25mm panoramic images on regular 35mm film.

My name is Ethan Moses, I make cameras at CAMERADACTYL. I 3D print film cameras and ship them all over the world. I want to share the newest camera I’ve made: the CAMERADACTYL Brancopan, a 35mm wide format camera that makes 20x 24x58mm frames in a 1:2.4 aspect ratio on standard 36 exposure 35mm film.

Edelkrone's Flextilt Head 2 is its best-selling tripod head. If you can't afford the $149 it costs to get one, the company has just unveiled the Flextilt Head 3D, a cheaper option you can 3D print and assemble yourself.